Bathroom Remodeling in Grapevine

A new bathroom, built on what we find underneath

Most bathroom remodels start with a visible complaint: stained grout, a tub that feels dated, a floor tile that rings hollow. Those are usually symptoms. Before we price new finishes, we look for the reason the old ones wore out, so the new shower or floor is not sitting on the same problem.

That might mean checking the subfloor with a moisture meter, looking at how the shower was waterproofed, or tracing a slow drip at a valve. In North Texas, clay soil that swells and shrinks can move a slab enough to crack rigid tile, so we also look at whether movement played a part. What we learn shapes the plan, the materials and the quote you get.

If your bathroom work is part of a larger project, our kitchen remodeling and whole home remodeling pages explain how we handle more than one room at a time.

What the work includes

Shower and tub replacement

We remove the old enclosure, tub or shower base down to the framing. New work goes in over a properly sloped pan or a correctly set tub, with the valve and drain positioned for the finished wall.

Waterproofing behind the tile

Tile and grout are not waterproof on their own. We install a continuous membrane system on shower walls and floors, with sealed seams and corners, before any tile is set.

Tile floors and walls

We help you choose porcelain, ceramic or natural stone based on how each one wears, how slippery it gets when wet and how much upkeep it asks for. Layout is planned so cuts land at the edges, not in the middle of the room.

Subfloor and framing repair

Soft or stained plywood gets cut out and replaced, and framing is checked for rot or sag. A flat, stiff floor is what keeps new tile from cracking.

Fixtures and ventilation

We set new toilets, faucets and shower trim, and we look at whether the exhaust fan actually moves moist air outside. A fan that vents into the attic is a common reason for mildew that keeps coming back.

Signs your bathroom needs more than a refresh

• Grout that keeps cracking

  Regrouting every year or two usually points to movement in the floor or wall underneath. New grout alone will crack again.

• A floor that gives near the toilet or tub

  Softness underfoot often means water has been reaching the subfloor for a while. It is worth opening up before it spreads to the joists.

• Stains on the ceiling below

  In a two-story home, a stain under an upstairs bathroom is a clear sign a pan, drain or supply line is leaking.

• Mildew that returns after cleaning

  Persistent mildew on ceilings and corners usually comes from poor ventilation or moisture trapped behind the wall.

• Loose or hollow-sounding tile

  Tiles that rock or sound hollow when tapped have lost their bond, often because water got behind them.

How a bathroom remodel runs

1. 1

   Phone call and visit

   You tell us what is bothering you and what you would like the room to become. We set a time to see the bathroom in person.

2. 2

   Inspection and findings

   We check moisture, floor stiffness, drains, valves and ventilation, and take photos of anything that needs attention. You see what we see and hear plainly whether a repair or a full rebuild makes more sense.

3. 3

   Written quote and selections

   Your quote lists the work line by line, including any hidden-condition repairs we found. We talk through tile, fixtures and finishes before anything is ordered, and we pull the permit when the plumbing work calls for one.

4. 4

   Demolition and rebuild

   We protect floors and walkways to the bathroom, contain dust, and remove the old finishes. Repairs, waterproofing, tile and fixtures follow in order, with each layer checked before the next covers it.

5. 5

   Final walk-through

   We clean up, test every fixture and drain, and walk the room with you so nothing is left unclear.

What shapes the cost of a bathroom remodel

Two bathrooms of the same size can price very differently. The biggest swings come from what is behind the walls and how far the new layout moves from the old one. Your quote spells out each part so there are no surprise line items later.

Condition underneath

Rotted subfloor, old leaks or missing waterproofing add repair work before the finish work starts. We show you this at the inspection, not halfway through the job.

Moving plumbing

Keeping the toilet, drain and shower valve where they are costs less than relocating them, especially on a slab foundation.

Tile choice and pattern

Large-format porcelain, natural stone and detailed patterns take more labor to set well than standard sizes laid straight.

Size and scope

A shower-only update is a different job from gutting the whole room down to the studs.